The following tutorial will show you how to download and use Ftp
(File Transfer Protocol).

*Since the file (ws_ftp32.zip) you are going to download is a winzip file, your computer must
  have Win Zip program so that you can extract this file and install FTP. If your computer
  doesn't have this program(Win Zip), please look at the first step of this page and follow the
  instruction to setup Win Zip program.

For information about uploading, see the uploading help page.

  Download WinZip from the TieUs Website by clicking on the link. The
      following window should appear. If you already have Winzip, skip to step 3.

Choose save to disk and click "OK". Another window will appear. Choose save in desktop from
the top of the window and then click "Save". Download should begin.

  Install Winzip by double-clicking on the winzip file which will appear on your desktop after
       downloading.

  Download the Ftp program ws_ftp32.zip the same way you downloaded the WinZip

     program.

This icon should appear on your desktop:

  Double-click on the icon and WinZip will open. Click on "I agree" and the following window will appear:

Click on "install" and then check the box "minimize during install". Click "OK". Continue to click "OK" and "I agree" when prompted to install the Ftp program.

  The following program group will be created and will appear on your desktop:

To access the Ftp program in the future click the Start Button and then click programs. Then click Ws_Ftp as shown below.

  To use the Ftp program, double click on the Ws_ftp32.exe icon. Click "OK". The following window will appear.

Locate the file on your hard drive which you would like to transfer (left side of the screen of your computer) and select the directory (on the right side of the screen of TieUs server) where you would like to transfer it. Click the arrow pointing to the right  and you're done!

Tip: To select multiple files which are together, hold click on the first file then hold the "shift" key and click on the last file. To select additional files which are not within the same block of files, hold down the "ctrl" key and click on the file.