|
Window 95/98/Me with Dial-Up Networking
Most of our users use window 95/98/Me
operation system. You can connect to TieUs from Windows 95/98/Me by using
Dial-Up Networking. To check if you have Dial-Up Networking
component installed in your computer, Double click on "My computer"
icon from Windows 95/98/Me desktop. In my computer window, If you can
see the "Dial-Up Networking" icon (Figure 1), you don?™t
need to install the component, you are ready to go.
Figure
1. My Computer Window
Figure 2. Make New
Connection
Double click on Dial-Up Networking,
click on new connection. Type a new connections name, for example,
"TieUs Internet." (Figure 2. Make New Connection). Click
on next, another window show up (Figure 3. Enter Phone Number),
enter telephone number (6046388856 for 56k line or 6047187288 for
33.6k line). Click on next and finished the setting. You should
now able to see another icon called "TieUs Internet" in
Dial-Up Networking folder. Double click on "TieUs Internet"
icon, a dial up window shows up (Figure 4. Enter Login, Password.).
After enter your login and password, click on connect. You should
able to hear your modem start to make a dial attempt. After the
dial complete, our system will check your login and password. After
the checking complete you will see a connection box shows on your
window. At this point, you are now connected to the Internet. Congratulation
! If you need more detailed information on creating new dial-up
connection check with FAQ Q3 at end of this document.
Figure 3. Enter Phone
Number
Type in the access phone number :
6046920739
(for 56K V.90 or X.2 modem)
or 6046388856 (for others modem)
Figure 4.
Enter Login, Password.
If you still cannot connect to TieUs Internet, please
check out our trouble shooting FAQ at the end of this document before
you contact our technical support. There might be some straight
forward answer already in this document. If you cannot find the
answer for your question, Please feel free to contact our technical
support at 604-6060668.
Window 95/98/Me without Dial-Up Networking
If you did not see the "Dial-Up
Networking" icon in My Computer windows, preparing to have
your Windows 95/98/Me installation disks or CD ready. The following
procedure will help you setting up Windows 95/98/Me Dial-Up Networking
Components including
Windows
95/98/Me Dial-Up Networking components
In order to use Windows 95/98/Me Dial-Up
Networking to connect to TieUs Internet, the following components
must be installed first:
Dial-Up Networking
Dial-Up adapter
TCP/IP protocols
1. Click on the
Windows 95/98/Me Start button, Select Settings and select Control
Panel.
2. Double-click
the Add/Remove Programs icon inside the Control Panel folder
(Figure 5).
Figure
5. Control Panel Folder
3. Select Windows Setup tab in
the Add/Remove Programs Properties window,
double-click on Communication in components
list. (Figure 6. Add/Remove Programs
Properties Windows)
4. In the communication
list, check (click on it) the box on the left side of Dial-Up
Networking (Figure 7 Communication Lists),
click on the OK button to go back to
previous windows, click on the OK button again.
5. Insert the
appropriate disk when prompted and click on the OK button.
6. Windows will
install the files and prompt for restarting the computer.
7. Restart the
computer
Check in your "my computer"
folder in the desktop to see if the Dial-Up Networking folder is
there. If it is installed, go to the previous setup procedure for
Window 95/98/Me with Dial-Up Networking.
Figure 6.
Add/Remove Programs Properties Windows
 Figure
7 Communication Lists
Installing
Dial-Up Adapter
To install Dial-Up
Adapter,follow these steps:
1.
Click on the Windows 95/98/Me Start button, selecting Settings and select
Control
Panel.
2.
Double-click on the Network icon inside Control Panel folder.
3.
Click on the Configuration tab and look for Dial-Up Adapter in
the list of
network components.
4.
If Dial-Up Adapter is found, proceed to the Installing TCP/IP
protocol section.
Otherwise, click on the Add button.
5.
Select the Adapter network component and click on the Add button.
6. In
the list of Manufactures, select Microsoft.
7.
In the list of Network Adapters, select Dial-Up Adapter, click
on the OK
button, and click on the OK button again.
8.
Insert the appropriate disk when prompted and click on the OK
button.
9.
When prompted to restart the system, do not restart the system
yet. Instead
click on the No button and move to the next
section.
Installing
TCP/IP protocol
To install TCP/IP
protocol, follow these steps:
1.
Click on the Windows 95/98/Me Start button, Select Settings and select
Control
Panel.
2. Double-click
on the Network icon inside Control Panel folder.
3.
Click on the Configuration tab and look for TCP/IP in the list
of network
components.
4.
If TCP/IP is found, proceed to the Binding TCP/IP protocol to
Dial-Up adapter
section. Otherwise, click on the Add button.
5.
Select the Protocol network component and click on the Add button.
6. In
the list of Manufactures, select Microsoft.
7.
In the list of Network Protocols, select TCP/IP protocol, click
on the OK
button, and click on the OK button again.
8.
Insert the appropriate disk when prompted and click on the OK
button.
9.
When prompted to restart the system, do not restart the system
yet. Instead
click on the No button and move to the next
section.
Binding
TCP/IP protocol to Dial-Up adapter
To bind TCP/IP protocol
to Dial-Up adapter, follow these steps:
1.
Click on the Windows 95/98/Me Start button, select Settings and select
Control
Panel.
2.
Double-click on the Network icon inside Control Panel folder.
3.
Click on Dial-Up adapter and click on the Properties button.
4.
Select the Bindings tab.
5.
If the TCP/IP protocol is checked, if not, check it.
6.
Click on the OK button and click on the OK button again.
7.
When prompted to restart the system, do not restart the system
yet. Instead
click on the No button and move to the next
section.
Checking
TCP/IP Protocol setting
1.
Click on the Windows 95/98/Me Start button. select settings and select
Control
Panel.
2. Double-click
on the Network icon inside Control Panel folder.
3. Check
the Dial-Up adapter and TCP/IP protocols
4.
Click on TCP/IP protocol and click on the Properties button.
5.
Click on the IP Address tab and select Obtain an IP Address
automatically
6.
Click on the WINS Configuration tab and select Disable WINS Resolution
7.
Click on the Gateway tab and make sure no gateway info is supplied.
8.
Click on the DNS Configuration tab, Select the Disable DNS
option.
9.
Click on OK button and click on OK button again
10.
Restart your computer.
After you restart
the computer you should able to see the dial-up networking component
installed.
Q1. (1) How do I setup a dialup entry
for TieUs Internet. (2) After I double click on new connection
called "TieUs Internet" I just make, a connection dialog
box shows up (figure 4). After I click the connect, it takes a
long time to check the login and password.
A1.
The following section answer creating and setting of dial-up networking
entry.
Creating
and Setting up Dial-Up Networking Entry for TieUs
To create and setup
a Dial-Up Networking Entry for TieUs, follow these steps:
1.
Click on the Start button, select Programs, select Accessories,
and select
Dial-Up Networking.
2.
Double-click on Make New Connection icon.
3.
Type a name for the computer for dial up: Type in "TieUs
Internet"
4.
Click on the Next button.
5. At
the Telephone number input field, type in our dial-up access phone
number.
6. Click
on the Next button.
7. Click
on the Finish button. An icon named TieUs will show.
8.
Right-click on the TieUs icon and select Properties.
9.
Click on the Server Type button.
10.
For the Type of Dial-Up Server, select PPP: Windows 95, Windows
NT
3.5, Internet option.
11.
Un-select Log on to Network, Un-select NetBEUI, Un-select
IPX/SPX
compatible and leave the TCP/IP
selected. (This will speed up your login
process)
12.
Click on the TCP/IP Settings button.
13.
Select Server assigned IP address option.
14. Select
Server assigned name server addresses option.
15.
Click on the OK button again to finish the process.
Q2. (1)Do I need to set TCP/IP and DNS
name before connect to Internet (2)After Connect to TieUs. I cannot
browse any web site. The browser seems going nowhere.
A2.
If you can connect to Internet and cannot browse the web. You
might have your DNS setting wrong from your previous ISP. You
really don?™t need to have those DNS information for connecting
to TieUs, our server will response those information to your computer
during connection. If you really want to put the information for
DNS setting please follow the procedure.
Setting
TieUs Domain information
To set TieUs Domain
information, follow these steps:
1.
Click on the Windows 95/98/Me Start button, select Settings and select
Control Panel.
2.
Double-click on the Network icon inside Control Panel folder.
3.
Click on TCP/IP protocol and click on the Properties button.
4.
Click on the IP Address tab and select Obtain an IP Address automatically
5.
Click on the WINS Configuration tab and select Disable WINS Resolution
6.
Click on the Gateway tab and make sure no gateway info. In supplied.
7.
Click on the DNS Configuration tab.
8.
Select the disable DNS option. (You don't really need to enable
this for TieUs)
9. Click
on the OK button and click on the OK button again.
10.
In order for the installation/settings to take into effect, the
computer must be restarted. Click on the Yes button to restart
the computer when prompted.
Overview of related setting information
for TieUs Internet
Updated on: Aug. 07, 2001
|
